HomeLifestyleOur Suzuki Jimny 2.0 Build: From Daily Driver to IRONMAN 4x4 Micro-Overlander

Our Suzuki Jimny 2.0 Build: From Daily Driver to IRONMAN 4×4 Micro-Overlander

Photo credit: ZA Bikers

Originally, we acquired our 5-door Jimny as a long-term media vehicle to assist us in the field while creating content and transporting camera equipment and the like to some weird and wonderful places.

Suzuki gave us a simple brief: do not go all out and build an extremely capable rock-climbing turbo mini-monster truck, but rather add some tasteful, ‘OEM-approved’ accessories that maximise the already practical nature of the Jimny. When the time came to return the Jimny, I’d fallen so in love with it and the way it fits my lifestyle that I decided to purchase the vehicle from Suzuki.

Photo credit: ZA Bikers

The next step was a 2.0 build, working alongside some new and exciting 4×4 accessory partners. But before we got started, there were a few accessories we knew would stay. They had proved their value over the years, and replacing them made little sense.

What stayed and why?

Takla Products

We fitted Takla seat covers to our five-door Jimny to protect the interior while using it for work, family life and trips. After two years and 30,000 km of daily driving, off-road use, muddy gear, kids, dogs and camera equipment, the covers were worn in but still in good shape. The original seats underneath were still like new.

Photo credit: ZA Bikers

Instead of replacing the covers, we used Takla’s cleaning and refitment service. They hand-washed the interior and refreshed the installation, including the load-liner Velcro. The Jimny’s seat-cover clean cost about R750; the full-interior service was estimated at R1,500, depending on the vehicle. The covers came back looking nearly new, so we plan to do it again after another 30,000 km.

General Tire

We considered switching to General’s more aggressive Grabber X3 mud-terrains, but chose a fresh set of Grabber AT3s for the Jimny for the third time because they suit how we actually drive: mostly tar and gravel, with occasional rough off-road sections.

Photo credit: ZA Bikers

The AT3s have already proved themselves on thousands of kilometres around Southern Africa. A trip through rain-damaged Botswana roads, deep potholes and long gravel detours reinforced that they could handle tough conditions confidently.

The X3s looked tougher and promised more grip in deep mud, but come with a whole host of unpleasant compromises. Since we don’t spend enough time in extreme mud to justify those compromises, the AT3 remains the better all-round choice: capable across tar, gravel and occasional technical terrain, without making the Jimny unpleasant to live with.

Photo credit: ZA Bikers

Front Runner

Standard issue on Suzuki Jimnys, and OEM-approved. The Front Runner rack and ladder have become the Jimny’s practical foundation for carrying adventure gear and expanding what the vehicle can do.

Photo credit: ZA Bikers

We’ve used the rack to carry bicycles, storage boxes, MaxTrax recovery boards and camping gear, while keeping more space free inside the vehicle. Later, it supported a rooftop tent, awning and water tank for camping trips.

That’s why the rack and ladder are staying in the Jimny 2.0 build: they’ve already proved their value over years of use, and they give us a flexible base to mount the next set of accessories we had planned.

Photo credit: ZA Bikers

What’s new in the Jimny 2.0 build?

First up was the suspension. After two years with the standard setup, I’d found it struggled once the Jimny was carrying extra gear. Its soft suspension and narrow track also made for a choppy ride. With more accessories planned for the 2.0 build, upgrading the suspension was the obvious first step.

Photo credit: ZA Bikers

Enter IRONMAN 4X4

The aim was to improve stability, bump absorption, ride comfort and load-carrying ability—not to build a rock-crawler. After researching several brands, we felt IRONMAN 4X4 offered the best value for money. Based on how we use our Jimny and the accessories we planned to fit, the recommendation was the medium IRONMAN 4X4 Nitro Gas suspension kit, priced at R21,495 before fitting.

Photo credit: ZA Bikers

The difference was immediately noticeable. The ride was surprisingly plush, while bump absorption and driving control improved significantly. The Jimny felt more composed and confidence-inspiring, both when loaded and in everyday driving. The kit didn’t just meet our aims; it exceeded them.

Photo credit: ZA Bikers

Why IRONMAN 4X4? The company grew from a Melbourne suspension-parts business founded in 1958. It launched its 4×4 brand in 1988, then expanded into a wider range of off-road and touring equipment. Today, its products are designed in Australia and distributed globally, with a Johannesburg-based operation serving Southern Africa.

The suspension was just the beginning. We brought IRONMAN 4X4 on as the primary build partner for the Jimny 2.0 project and selected a range of accessories to make it more capable and practical for the adventures ahead. Here’s what we’ve added…

Deluxe Bull Bar and 5-inch Scope Combo Beam Driving Lights: We fitted these together to add front-end protection and improve visibility after dark. The bull bar’s triple-hoop design helps protect the headlights and bonnet, and its mounting provisions let us fit the driving lights neatly. The combo beam gives us a wider spread of light for winding roads and tracks, while the bar’s winch-ready cradle leaves the option of adding a winch later.

Snorkel: We fitted the IRONMAN 4X4 snorkel to raise the engine’s air intake and help protect it from dust and debris on dry routes, as well as reduce the risk of water entering during crossings. It’s a practical addition for the kind of off-road travel we have planned.

Photo credit: ZA Bikers

IRONMAN 4X4 Orion 1200 Rooftop Tent: We fitted the Orion 1200 to create a comfortable sleeping space that’s quick to set up, while keeping more room inside the Jimny for people and gear. The hardshell tent opens with two latches and gas struts. Its front awning provides shelter at the entrance and can be rolled away in good weather.

Photo credit: ZA Bikers

The blackout-coated ripstop polycotton helps control light and temperature, while ventilation helps keep the sleeping area fresh and reduces condensation. A high-density mattress and 3D anti-condensation mat add comfort. There’s also an inlet for a heater or cooler, with an optional thermal liner for colder weather.

Photo credit: ZA Bikers

Inside, the tent has LED strip lighting, storage pockets along the sides and roof, boot bags, a removable washable mattress cover and a telescopic ladder. It has a 300 kg load rating, and its roof plates and side tracks make it easy to mount accessories such as our MaxTrax recovery boards.

IRONMAN 4X4 Deltawing 270° Awning: We added the awning to create a sheltered area around the Jimny when camping, extending the living space alongside the rooftop tent. It mounts on the left side and wraps around the front, side and rear without blocking the doors. One person can set it up in under a minute, and the integrated USB-powered LED lighting is useful after dark. Support poles and guy ropes can be deployed for extra stability in wind or rain.

Empire Graphic Company

Empire Graphic Company has been part of our Jimny story since the original build. Based alongside FAST KTM in Alberton, the team specialises in graphic design, vehicle branding and custom graphics. For our first five-door Jimny, we asked for a clean branded look with subtle, adventure-inspired details, and were impressed with the result.

For the 2.0 build, we returned to Empire to refresh the design. The new graphics are more visually striking, combining mountain imagery and topographic map detailing with a matte-black treatment at the rear and our build partners’ logos. We’ve carried IRONMAN 4X4’s green throughout the design, including in our own logo, to create a consistent look across the project.

Looking ahead: the build now gets used

The next step is to get the Jimny out on the road and onto the trails. We’ll start with advanced 4×4 training with Ryno Cloete from Jimny Drive. This will give us the opportunity to put the new suspension and tyre setup to work off-road, build our skills and see how the changes affect the Jimny in more demanding terrain. From there, we’ll take it on trips and camping adventures.

Photo credit: ZA Bikers

We’re also planning to use the Jimny to test selected products from Liqui Moly’s 4×4 and Bakkie Series, exploring how they fit into preparing and maintaining a 4×4 for adventure. Those stories will follow as we gain real-world experience with the Jimny and the products. In-depth testing and our conclusions on the equipment are still ahead.

Watch this space as we take the Jimny 2.0 build out on the road, trail and campsite—and share what we learn along the way.

Simon Morton
Simon Morton

Online Editor at ZA Bikers / ZA Lifestyle.

RELATED ARTICLES

STAY CONNECTED

74,000FansLike
10,500FollowersFollow